Issue
- Oven clock flashes
- Oven clock displays "0:00" or "12:00" and flashes
- How to set the oven clock?
Applies to
- integrated oven
Resolution
If your oven clock displays "0:00" or "12:00" and flashes then you do not need to do step 1 in this guide.
If you are wanting to change the time of day then you will need to do step 1.
Touch control
1. Press 
until starts to flash 
2. Use 
and 
to set the hour
3. Press 
to confirm, now minutes should be flashing 00
4. Use 
and 
to set the minutes
5. Press 
to confirm
Touch Control (With - and +)
1. Press 
until the time of day it starts to flash 
2. Use 
and 
to set the correct time
3. Leave for approximately 5 seconds and the time set itself
Touch Control (without - and +)
1. Press 
until time of day it starts to flash 
2. Use the temperature dial to set the hour
3. Press to confirm 
, now minutes should be flashing 00
4. Use the temperature dial to set the minutes
5. Press to confirm 
If you found the following information helpful, please give us a thumbs up below. If this information did not resolve your question, all constructive feedback is welcome.
Cause
- Flashing "0:00" on the clock’s display may be caused by an earlier power failure in the socket to which the oven is connected to.
